Web Remote Control Menu; Video Monitoring Settings (Monitoring Settings) - Sony PXW-Z280T Operating Instructions Manual

2
Launch a browser on the device, then
access "http://IP address of camcorder/
rm.html."
Example: When the IP address is
192.198.122.1, input http://192.168.1.1/
rm.html in the address bar.
You can check the IP address of the
camcorder on the Network Status screen
(page 16).
3
Input the user name and password
(Network menu t Access
Authentication t User Name and
Password) in the browser.
When connection is successful, the web
remote control screen appears on the device.
You can then use the web remote screen to
operate the camcorder.
Button operation can be disabled by sliding
the Lock switch to the right.
Notes
• The web remote control screen may not match the
camcorder settings under the following circumstances.
If this occurs, reload the browser window.
 If the camcorder is restarted while connected
 If the camcorder is operated directly while
connected
 If the device has been reconnected
 If the browser forward/back buttons have been used
• The web remote control may not function if the
wireless signal strength becomes weak.
Web remote control compatible devices
You can use a tablet or computer to configure and
operate the camcorder. The supported devices,
OS, and browsers are shown in the following
table.
Device OS
Tablet Android 6/7
iOS 11
Computer Windows 7/8.1/
10
macOS 10.12/
10.13
For details about devices supported using the
"Content Browser Mobile" application, contact
your Sony sales or service representative.
Tapping
Control screen will display the screen selection
menu. Select Monitoring Settings to display the
Monitoring Settings screen.
Tapping
Settings screen will display the setup menu for
tasks, such as file transfer.
Menu items
• Remote Control
• Monitoring
• File Transfer
You can set the format when monitoring on a
device.
Browser
Chrome
Safari
Chrome
Size
Sets the picture size and bit rate of the video for
Safari
monitoring.
• 480×270(1Mbps)
• 480×270(0.5Mbps)
Frame Rate
Displays the frame rate of the video for
monitoring.
69
Web Remote Control
Menu
in the top left of the Camera
in the top left of the Monitoring
Camera Control
Monitoring Settings
Slot A
Slot B
Slot SD/MS
Job List
Upload Settings
Video monitoring settings
(Monitoring Settings)