Table of Contents
Advertisement
76
5. Network Configuration: Configuring from the Web Menu
Item
Description
DNS Auto
Obtains DNS address
automatically.
When set to On, the address
of the DNS server is obtained
automatically.
Primary DNS
Enter the primary DNS server
Server
of the router.
Enabled when DNS Auto is
[Off].
Secondary DNS
Enter the secondary DNS
Server
server of the router.
Enabled when DNS Auto is
[Off].
Web/Cam
Enables/disables access to
Remote
the camcorder web menu
and Wi-Fi remote control.
When set to On, access is
permitted.
Submit
Sets the wired LAN settings.
[Note]
To prevent unauthorized access from the Internet, it is
recommended that Web/Cam Remote be set to On only
when the wired LAN network is not connected to the
Internet. When connecting to the Internet, check that
the network connection is a secure network before use.
Checking wired LAN settings
Use the Wired LAN >Status tab to monitor the
wired LAN status.
Transfer (Upload) Settings
You can register and set servers for
transferring proxy files or original files
recorded on the camcorder.
Auto transfer ON/OFF
If [Auto upload] is [On] and an Internet
connection exists, proxy files are automatically
transferred to the default server specified on
the Upload Settings tab when recording ends.
"Sony Ci," "NCM: RX Server," "Server Settings1,"
"Server Settings2," and "Server Settings3" are
registered as transfer destination servers. The
default value is "Sony Ci."
"Sony Ci" is the Media Cloud Services provided
by Sony. You can transfer files to the "Sony Ci"
cloud service.
[Notes]
ˎ The service may not be available in some regions.
ˎ
ˎ A subscription is required in order to use the "Sony Ci"
ˎ
cloud service. For details, visit www.SonyMCS.com/
wireless.
For details about the Sony Ci privacy policy, visit the
following sites.
‒ Terms of service
https://www.sonymcs.com/terms/
‒ Usage policy
https://www.sonymcs.com/use/
‒ Privacy policy
https://www.sonymcs.com/privacy/
ˎ The name of the transfer destination folder is
ˎ
specified in [Destination Directory]. If not specified,
a folder name with the current date is used. To
change the setting, see "To change registered server
settings" (page 77).
Use the following procedure to register with
"Sony Ci."
For details about registering, visit www.
SonyMCS.com/wireless.
1
Check that "Sony Ci" is displayed on the
[Upload Settings] tab, then click [Edit].
The "Sony Ci" setup screen appears.
2
Enter a user name in User, and a
password in Password.
The entered characters are visible when
Show Password is set to On.
Load Certification: Load button
Write the "Ci_certification.pem" Ci
certificate to be loaded to the root
directory of an SD card beforehand. For
details about Ci certificates, contact a
Sony professional sales representative.
3
Tap [Link].
A completion message appears after a
short while.
[Link] associates the user with the
camcorder. An Internet connection is
required to execute [Link].
4
Tap [OK].
After registering with "Sony Ci," [Unlink]
appears on the Settings screen. Tapping
[Unlink] releases the user account to
enable other user accounts to link with
the camcorder.
To register a destination server
You can select "Server Settings1," "Server
Settings2," or "Server Settings3" (registered in
Upload Server) as the destination server.
Select the server settings, tap Edit, and
configure the server information on the
displayed screen (below).
After specifying settings, tap [OK] to apply
the settings. Tapping [Cancel] discards the
settings.
Item
Description
Default Server
Set to [On] to set the default
file destination server.
(Displayed at the top of the
server list for file transfers.)
Display Name
Enter the name of the
server to display in the list.
Service
Displays the type of server.
FTP: FTP server
Host Name
Enter the address of the
server.
[Note]
If a port number other than
the default number of 21 is
used, append a colon and the
port number at the end of the
address (for example, ":123").
User
Enter the user name.
Password
Enter the password.
Show Password
When set to On, entered
characters are displayed.
PASV Mode
Enable/disable PASV mode.
Advertisement
Table of Contents
