Table of Contents
Advertisement
19
1. Overview: Screen Display
25.
Recording media state/remaining
capacity indicator for each media slot
Displays the state and remaining capacity of
the media in SxS slot A, SxS slot B, and the
PROXY SD card slot.
SxS slot icon indicator
* SxS slot A (SxSA) example. The icons for SxS slot B are
labeled SxSB.
Icon
Media state
–
Media not inserted or not
mounted
Media mounted
Media mounting
(flashing)
Recording (active)
(orange
bar)
Playback (active)
(green
indicator)
Recording/playback (active)
(orange bar
+ green
indicator)
SD card (for proxy data recording) icon
indicator
Icon
Media state
–
Media not inserted or not
mounted
Media mounted
Media mounting
(flashing)
Recording (active)
(orange
bar)
The remaining recording time is displayed
numerically.
26.
Audio level meter indicators
When the MONITOR (audio monitor selection)
switches (page 6) are set to CH-1/2,
the audio levels of channels 1 and 2 are
monitored. When set to CH-3/4, the audio
levels of channels of 3 and 4 are monitored.
27.
Clip name display
Displays the name of the clip currently
recording when recording, or displays the
name of the next clip to be recorded during
recording standby.
28.
Focus assist indicator
Displays a detection frame (focus area marker)
indicating the area for detection of degree of
focus, and a level bar (focus assist indicator)
indicating the degree of focus within that area.
29.
Time data display
Displays the remaining recording/playback
time, timecode, user bits, etc., as selected by
the DISPLAY switch (page 8).
30.
SD card indicator for saving configuration
data
Displays the state of the SD card (for saving
configuration data) inserted in the UTILITY SD
card slot.
Icon
Media state
–
SD card not inserted or not
mounted
SD card mounted
Mounted SD card is protected
SD card mounting
(flashing)
31.
SDI output REC trigger indicator
Displays the superimposition state of the
recording command sent to the SDI connector
output.
It is displayed when Maintenance >Camera
Config >HD SDI Remote I/F is set to
"Characters" in the setup menu.
32.
ALAC indicator
Displays "ALAC" when the ALAC (Auto Lens
Aberration Correction) function is set to be
performed automatically.
ALAC will be performed automatically when
an ALAC-compatible lens is attached, the
ALAC function is enabled, and Maintenance
>Camera Config >ALAC is set to "Auto" in the
setup menu.
33.
AE (auto iris) mode indicator
Displays the current operating mode of the
auto iris function using an icon and auto iris
override level.
Icon
Meaning
Backlight mode
Standard mode
Spotlight mode
34.
Auto focus mode indicator (when an auto
focus lens is attached only)
Displays the focus adjustment mode of the
camcorder.
ˎ AF (auto focus)
ˎ
ˎ MF (manual focus)
ˎ
ˎ MF* (manual focus with MF assist function
ˎ
on)
ˎ Full MF (full manual focus)
ˎ
35.
ND filter indicator
Displays the position number of the currently
selected ND filter (page 4).
When "Electrical CC" is assigned to an
assignable switch, the position (A/B/C/D) of
the electrical CC filter is displayed on the right
of the ND filter indicator (1 to 4).
36.
Gain indicator
Displays the gain setting (dB), set using the
GAIN switch, of the video amplifier.
When Operation >Base Setting >High
Sensitivity Mode in the setup menu is set to
On, a
icon is displayed.
37.
Shutter mode/shutter speed indicator
Displays the shutter mode or shutter speed.
"Setting the Electronic Shutter" (page 38)
38.
White balance mode indicator
Displays the currently selected white balance
automatic adjustment memory.
ATW: ATW (Auto Tracing White Balance) mode
W:A: Memory A mode
W:B: Memory B mode
W:C: Memory C mode
W:P: Preset mode
3200K: Appears when an assignable switch
assigned with Color Temp SW 3200K is on
4300K: Appears when an assignable switch
assigned with Color Temp SW 4300K is on
5600K: Appears when an assignable switch
assigned with Color Temp SW 5600K is on
6300K: Appears when an assignable switch
assigned with Color Temp SW 6300K is on
Advertisement
Table of Contents
