Table of Contents
Advertisement
136
9. Connecting External Devices: Managing/Editing Clips with a Computer
Media(B) to USB: Copy all clips from the
recording media inserted in slot B.
Media(A)(B) to USB: Copy all clips from the
recording media inserted in slot A and
slot B.
[Note]
When a copy destination folder is specified in step
1
and Media(A)(B) to USB is selected, slot A clips
are copied to the specified destination folder. Slot
B clips are copied to a folder that is automatically
created with a folder name the same as the
creation date of the first clip.
4
Turn the MENU knob to select [Execute],
then press the knob.
All clips on the target recording media are
copied to the USB media.
[Note]
If a clip with the same file name as the clip to copy
already exists in the destination folder, the clip is
not copied.
Displaying a list of clips on portable
storage/USB media
You can display a list of the clips on portable
storage/USB media using Operation >USB
>View Clip List in the setup menu.
Renaming a folder on portable storage/
USB media
You can rename a folder using Operation >USB
>Rename Folder in the setup menu.
1
Select Operation >USB >Rename Folder in
the setup menu.
2
Select the folder to rename, and press the
SET button.
A file name input screen appears.
3
Enter a folder name, and select [Done] on
the screen.
The folder is renamed.
Checking for copy read errors
You can check for read errors after writing
clips by setting Operation >USB >Error Check
in the setup menu to On.
Formatting portable storage/USB media
You can format portable storage/USB media
in exFAT format using Operation >USB >Format
USB in the setup menu.
1
Select Operation >USB >Format USB in the
setup menu.
2
Turn the MENU knob to select [Execute],
then press the knob.
Initialization (formatting) begins.
3
When the formatting is completed, a
message appears on the screen. Select
[OK].
Checking free space on portable
storage/USB media
The free space on portable storage/USB
media is displayed in the Media Remain row
on the screen displayed when Operation >USB
in the setup menu is selected.
About power supply to portable
storage/USB media
Power is supplied to portable storage/USB
media from the external device connector
automatically when performing an operation
in Operation >USB in the setup menu.
However, power supply is not started
under the following conditions, even when
performing an operation in Operation >USB in
the setup menu. To start the supply of power,
perform the solution shown in the table.
State
Solution
During clip recording,
Terminate the
playback, thumbnail
previous
display, proxy recording,
operation.
streaming, proxy transfer,
or live transfer mode
Network Client Mode is On
Set Network Client
Mode to Off.
Camera adaptor is
Unmount the
connected
a)
camera adaptor
connection.
a) Connection of a camera adaptor is supported on the
Japanese model only.
[Notes]
ˎ Clips on portable storage or other USB media cannot
ˎ
be copied to recording media inserted in an SxS card
slot.
ˎ Clips cannot be recorded while power is supplied to
ˎ
the external device connector. To start recording clips,
terminate the Operation >USB operation in the setup
menu.
Advertisement
Table of Contents
