Table of Contents
Advertisement
150
11. Appendix: Messages Displayed During Operation
Operation
Assignable switch assigned with Shot Mark2
was operated
Assignable switch assigned with Clip Flag
OK was operated
Assignable switch assigned with Clip Flag
NG was operated
Assignable switch assigned with Clip Flag
Keep was operated
SLOT SELECT button was operated
An assignable button assigned with Slow &
Quick Motion was operated in a recording
format that does not support Slow & Quick
Motion.
Message
Shot Mark2
(arbitrary character string when defining
planning metadata)
Cannot Record Essence Mark
Reached Essence Mark Limit
Cannot Proceed
OK Clip Flag
Delete Clip Flag
Cannot Proceed
NG Clip Flag
Delete Clip Flag
Cannot Proceed
KEEP Clip Flag
Delete Clip Flag
Cannot Proceed
Switched Slot
Cannot Proceed
S&Q Unsupported Rec Format
Meaning and possible cause
Shot mark 2 was added.
Cannot add because the maximum number of essence marks has been reached.
Cannot add because of the following conditions.
ˎ Cannot write because the media on which to record clips is write-protected
ˎ
ˎ Picture Cache Rec function is set to On
ˎ
ˎ Interval Rec recording is in progress
ˎ
ˎ Media is write-protected
ˎ
ˎ Target clip is recorded on an SD card
ˎ
Clip flag (OK mark) was added.
Clip flag (OK mark) was deleted (by pressing the switch twice).
Cannot execute because of the following conditions.
ˎ Media is write-protected
ˎ
ˎ Target clip is recorded on an SD card
ˎ
Clip flag (NG mark) was added.
Clip flag (NG mark) was deleted (by pressing the switch twice).
Cannot execute because of the following conditions.
ˎ Media is write-protected
ˎ
ˎ Target clip is recorded on an SD card
ˎ
Clip flag (KEEP mark) was added.
Clip flag (KEEP mark) was deleted (by pressing the switch twice).
Cannot execute because of the following conditions.
ˎ Media is write-protected
ˎ
ˎ Target clip is recorded on an SD card
ˎ
Recording media to use was changed.
Slow & Quick Motion cannot be used due to unsupported format.
Advertisement
Table of Contents
