Configuring From The Web Menu - Sony PXW-X400KC Operating Instructions Manual

000 67
5. Network Configuration

Configuring from the Web Menu

The web menu of the camcorder appears when
the camcorder is accessed from a browser
on a device connected using a wireless LAN
connection. Using the web menu, you can
configure settings related to wireless functions,
transfer files, and perform other actions.
Displaying the Web Menu
1
Connect the camcorder to the Internet using
the procedures in "Connecting Devices using
Wireless LAN" (page 56) and "Connecting to
the Internet" (page 59).
2
Launch a browser on the device and enter
"http://192.168.1.1:8080/index.html" in the URL
bar.
The user name and password entry screen
appears.
3
Enter a user name and password, then select
[OK].
For the user name and password for access
authentication, see Maintenance >Basic
Authentication (page 101) in the setup menu.
Setup Menu
Launch a browser on the device and enter
"http://<IP_address>/rm.html" in the URL
bar, where "<IP_address>" is the IP address
(Maintenance >Network >IP Address in the setup
menu) of the camcorder, to display the Media Info
>SD Card screen of the camcorder
Tapping in the top left of the web menu screen
will display the configuration menus. Tap the item
you want to configure.
The menu has the following items: Settings, Media
Info, Job List, and Cam Remote Control.
Settings
Used to configure the camcorder. This screen has
the following items.
Item Description See
Wireless Streaming Streaming Format
Module format Settings(page 67)
>Streaming settings
Format
Proxy format Proxy Format
Wireless
Module settings Settings(page 68)
>Proxy
Format
Wireless LAN Wireless LAN Wireless LAN Station
>Station settings Settings(page 68)
Settings
Wireless LAN Wireless LAN Checking wireless
>Status settings status LAN
settings(page 69)
Wired LAN Wired LAN Wired LAN
>Wired LAN settings Settings(page 69)
Settings
Wired LAN Wired LAN Checking wired LAN
>Status settings status settings(page 69)
Upload Transfer Transfer (Upload)
Settings settings Settings(page 69)
Media Info
Displays media information and is used to select
files to transfer from media.
ˎ SD Card: Media inserted into the PROXY SD card ˎ
slot of the camcorder
Double-clicking a file will start playback of the
selected file.
[Note]
Playback may not be supported, depending on the
operating system of the terminal device used and the
browser version. If this occurs, use "Content Browser
Mobile."
ˎ Slot A: Media inserted into card slot A of the ˎ
camcorder
ˎ Slot B: Media inserted into card slot B of the ˎ
camcorder
Job List
Displays the Job List screen for managing file
transfers (page 70).
Cam Remote Control
Displays the Wi-Fi remote control screen
(page 65).
Streaming Format Settings
You can configure the stream for monitoring
by devices, and set the format and transmission
destination of the stream for streaming via the
Internet or local network.
Video
ˎ AVC/H.264 Main Profile, 4:2:0 Long GOP ˎ
ˎ Size is selected in the following settings. ˎ
Audio
ˎ AAC-LC compression ˎ
ˎ Sampling frequency: 48 kHz ˎ
ˎ Bit rate: 128 kbps for stereo
ˎ
Monitoring Settings
You can set the format for monitoring by devices.
Item Description Setting
Monitoring Sets the video size 480×270(1Mbps)/
Size and bit rate for 480×270(0.5Mbps)
monitoring.
Monitoring Displays the video 23.98fps/25fps/
Frame Rate frame rate for 29.97fps/50fps/
monitoring. 59.94fps
Monitoring Displays the video 1Mbps(VBR)/
Bit Rate bit rate for 0.5Mbps(VBR)
monitoring.
[Notes]
ˎ The bit rate is an average value, so this value may be
ˎ
exceeded at times.
ˎ A video frame rate of 24 fps is not supported. ˎ
ˎ 640×360 (3Mbps (VBR)) is not supported for Monitoring ˎ
Size.