Assigning Functions To Assignable Switches - Sony PXW-Z750 Operating Instructions Manual

120
7. Menu Display and Settings

Assigning Functions to Assignable Switches

Using the Assignable Switch item of the Operation menu, you can assign user-specified functions
to the ASSIGN. 0 to 3 switches, the ASSIGNABLE 4 and 5 switches, the ONLINE button, and the
RET button on the lens.
The following tables lists the functions that are assigned when the camcorder is shipped from
the factory.
Switch or button Function
ASSIGN. 0 switch No assignment
ASSIGN. 1 switch No assignment
ASSIGN. 2 switch No assignment
ASSIGN. 3 switch No assignment
ASSIGNABLE 4 switch No assignment
ASSIGNABLE 5 switch No assignment
RET button Rec Review (if playback is allowed)
ONLINE button Auto transfer proxy clip
Functions That Can Be Assigned to the ASSIGN. 0 Switch
Assignable Switch Function
setting
Off No assignment
Marker Turns the display of all markers on/off.
ATW Hold Holds the white balance setting in the ATW
(auto-tracking white balance) mode
Picture Cache Rec Turns Picture Cache Rec mode on/off.
Focus Magnifier Turns the focus magnification function on/off. Setting not retained
Zebra Turns zebra display on/off.
Shot Mark1 Writes Shot Mark1.
Shot Mark2 Writes Shot Mark2.
Clip Flag OK Adds/Clears an OK mark to/from the clip
being recorded or played.
Clip Flag NG Adds/Clears an NG mark to/from the clip
being recorded or played.
Clip Flag Keep Adds/Clears a KP (Keep) mark to/from the clip
being recorded or played.
Functions That Can Be Assigned to the ASSIGN. 2 Switch
[Note]
Immediately after you assign a function to the ASSIGN. 2 switch or you switch the recording format, the setting of the
switch at that point may not match the camcorder's internal state. After assigning a function, switch the ASSIGN. 2
Assignable Switch setting
switch or power the camcorder off and on again.
Off
Assignable Switch
Off
setting
Off
Off
Off
Front Mic
Off
Off
Marker
Lens RET
Picture Cache Rec
Network Client Mode
Zebra
Clip Continuous Rec
Rec Source
TX Power Save
1) When Picture Cache Rec is assigned, Operation >Rec Function is disabled (grayed out) and cannot be set.
State when camcorder is
next powered on
–
Setting retained
–
Setting retained
Setting not retained
–
–
Setting not retained
Setting not retained
Setting not retained
Function
No assignment
Switches between stereo and monaural when a stereo microphone is
connected.
Turns the display of all markers on/off.
1) Turns Picture Cache Rec mode on/off.
Turns zebra display on/off.
Turns Clip Continuous Rec mode on/off.
Switches the signals to be recorded between the camera picture and
external input. (If the camcorder is currently recording or playing, the
switch takes effect after recording or playback ends.)
Switches the wireless transmitter power saving mode.