Configuring The System - System Menu; Information Tab; Date & Time Tab - Sony SRG-X400 Operating Instructions Manual

Configuring the System
― System Menu
When you click in the Administrator menu,
the System menu appears.
Use this menu to set the basic settings of the
camera.
The System menu consists of the [Information],
[Date & time], [Installation], [Initialize], [System
log], and [Access log] tabs.

Information tab

You can also refer from the OSD menu. For
details, see "DEVICE INFO (Device information of
the camera and setting status of switches on the
back of the camera)" (page 49).
Information
Model Name (DEVICE INFO - MODEL NAME)
Displays the model name of the camera.
Serial number (DEVICE INFO - SERIAL NUMBER)
Displays the serial number of the camera.
Software version (DEVICE INFO - VERSION)
Displays the software version of the camera.
Date & time tab
Date & time
Current date & time
Displays the date and time set on the camera.
Notes
• Time may not be set correctly at the time of
purchase. Be sure to check the date and
time of the camera and set as necessary.
• Time setting is initialized at factory default
settings.
PC clock
Displays the date and time set on your computer.
Date & time format
Select the date and time format to be displayed on
the viewer from the drop-down list.
You can select the format from [yyyy-mm-dd
hh:mm:ss] (year-month-day
hours:minutes:seconds), [mm-dd-yyyy hh:mm:ss]
(month-day-year hours:minutes:seconds), and
[dd-mm-yyyy hh:mm:ss] (day-month-year
hours:minutes:seconds).
Time setting
Select how to set the date and time.
[Keep current setting]: Select when you do not set
the date and time of the camera.
[Synchronize with PC]: Select when you
synchronize the date and time between the
camera and the computer.
[Manual setting]: Select when you set the date and
time of the camera manually.
Select the year, month, day, hours, minutes,
and seconds from each drop-down list.
[Synchronize with NTP]: Select when you
synchronize the date and time between the
camera and the time server called NTP
(Network Time Protocol) server.
Set the NTP server when [Synchronize with
NTP] is selected.
NTP Auto
Select the checkbox when you obtain the NTP server
information from the DHCP server.
Clear the checkbox when you specify the NTP server
directly.
NTP server
When [NTP Auto] is not selected, specify the NTP
server for synchronization.
NTP interval
Specify the interval for time synchronization with the
NTP server.
You can set from 100 to 86,400 seconds.
Time zone
Set the time difference from Greenwich Mean Time
according to the area where the camera is installed.
Select the time zone of the area where the camera is
installed from the drop-down list.
Automatically adjust clock for daylight saving
time changes
The clock time is automatically adjusted according
to the daylight saving time of the selected time
zone.
66