Table of Contents
Advertisement
69
5. Network Configuration
Transmitting Streaming Video and Audio
You can transmit the video and audio
captured/played back with the camcorder via
the Internet or local network.
Preparation for Streaming
Transmission
1
Connect the camcorder to the Internet
using the procedures in "Connecting
Devices using Wireless LAN" (page 57)
and "Connecting to the Internet"
(page 61).
2
Select Preset1 (or Preset2, Preset3) in
Maintenance >Streaming in the setup
menu.
The streaming connection destination
setup screen appears.
3
Set Size, Bit Rate, Type, and items
according to Type on the screen.
For details and limitations about settings,
see "Streaming Settings" (page 74).
4
Select Preset1 (or Preset2, Preset3), set in
1
2
steps
and
, in Maintenance >Streaming
>Preset Select in the setup menu.
Starting Streaming
1
Set Maintenance >Streaming >Setting in
the setup menu to On.
Streaming starts according to the
settings.
You can assign Streaming to an
assignable switch. For details about
assignment, see "Assigning Functions to
Assignable Switches" (page 120).
[Notes]
ˎ Streaming cannot be started under the following
ˎ
menu settings.
‒ When Maintenance >Network >Setting in the setup
menu is set to Off
‒ When Maintenance >Network Client Mode >Setting
in the setup menu is set to On
‒ When Maintenance >Network >Setting in the setup
menu is set to On, but Maintenance >Network >Wi-
Fi Mode is set to Off and Maintenance >Network
>Wired LAN is set to Disable
ˎ It may take several tens of seconds to stream actual
ˎ
video or audio after starting streaming.
ˎ You cannot start streaming when playing back an SD
ˎ
format clip.
ˎ If you set the streaming transmission destination is
ˎ
set incorrectly or the camcorder does not connect
to the network, "×" appears on the screen as the
streaming status indicator.
ˎ Streaming in network client mode (page 70),
ˎ
monitoring, proxy recording, and file transfer are not
available after switching to streaming mode.
ˎ Starting streaming while monitoring, proxy recording,
ˎ
or transferring files will stop the corresponding
function.
Stopping Streaming
Set Maintenance >Streaming >Setting to Off to
stop streaming.
When Streaming is On, streaming can also be
stopped by pressing the assignable switch to
which Streaming has been assigned.
When the camcorder is connected to a
device via Wireless LAN (page 57) or is
connected to the Internet using wireless LAN
station mode (page 59), you can also set
the streaming transmission destination and
start/stop streaming from the web menu
(page 73).
Advertisement
Table of Contents
