Table of Contents
Advertisement
109
7. Menu Display and Settings: Maintenance Menu
Maintenance >Audio
Makes settings related to audio.
Item
Setting
Rear2/WRR Level
Side2/Front/Front+Side2
Audio CH3 Level
Side3/Front/Front+Side3
Audio CH4 Level
Side4/Front/Front+Side4
Maintenance >WRR Setting
Makes settings related to the wireless tuner.
Item
Setting
WRR Valid CH Sel
All/CH1
WRR CH Select
TX1/TX2
WRR Delay Comp
On/Off
TX
---
TX Audio Peak
---/Peak
Description
Selects the knob for adjusting the audio level
of a wireless microphone or a device
connected to the AUDIO IN CH-2 connector on
the rear panel.
Side2: LEVEL knob (right) on the side panel
Front: MIC LEVEL knob on the front panel
Front+Side2: LEVEL knob (right) and MIC
LEVEL knob (linked control)
Selects the knob for adjusting the audio level
recorded on channel 3.
Side3: LEVEL knob on the side panel
Front: MIC LEVEL knob on the front panel
Front+Side3: LEVEL knob and MIC LEVEL knob
(linked control)
Selects the knob for adjusting the audio level
recorded on channel 4.
Side4: LEVEL knob on the side panel
Front: MIC LEVEL knob on the front panel
Front+Side4: LEVEL knob and MIC LEVEL knob
(linked control)
Description
Selects whether to enable channels 1 and 2 of
the wireless tuner (All) or channel 1 only (CH1).
Selects the reception channel for display in
the menu.
TX1: Displays channel 1.
TX2: Displays channel 2.
Selects whether to enable (On) or disable
(Off) the delay compensation function for
wireless input audio. (When On is selected, all
E-E output audio is delayed by about 8 ms.)
Displays the name of the transmitter whose
signals are being received on the channel
selected by WRR CH Select.
Displays whether the AF level of the
transmitter whose signals are being received
on the channel selected by WRR CH Select are
over peak.
Maintenance >WRR Setting
Makes settings related to the wireless tuner.
Item
Setting
TX Input Level
---/Mic/Line
TX ATT Level
---
TX LCF Frequency
---
TX System Delay
Auto/0.0ms to 8.0ms
TX RF Power
High (Power value) mW/Mid
(Power value) mW/Low
(Power value) mW
TX Power Save
Active/Sleep
TX-Cam Power Sync
Off/On
Description
Displays whether the input level of the
transmitter whose signals are being received
on the channel selected by WRR CH Select is
set to microphone (Mic) or line (Line).
Sets the ATT level of the transmitter whose
signals are being received on the channel
selected by WRR CH Select. (The setting range
varies depending on the transmitter.)
Sets the low cut filter frequency of the
transmitter whose signals are being received
on the channel selected by WRR CH Select.
(The setting range varies depending on the
transmitter.)
Sets the amount of audio delay.
Auto: Automatically corrects for the amount
of delay so that the delay in the audio
from the wireless tuner is zero.
0.0ms to 8.0ms: Sets the amount of
estimated wireless system delay, for cases
in which several wireless systems are
being used via a device such as an audio
mixer.
Sets the RF power level of the transmitter
communicating on the channel selected by
WRR CH Select. (The setting range varies
depending on the transmitter.)
Sets the power saving mode of the
transmitter whose signals are being received
on the channel selected by WRR CH Select.
Active: Set the transmitter to startup mode.
Sleep: Set the transmitter to power saving
mode.
Sets whether the transmitter power-save
state is also switched in sync with the POWER
switch of the camcorder.
Advertisement
Table of Contents
