Table of Contents
Advertisement
125
8. Saving and Loading User Configuration Data
ALL Files
Saving Configuration Data as an
ALL File
1
Select File >All File >Save SD Card in the
setup menu.
A screen for selecting an ALL file save
destination appears.
2
Turn the MENU knob to select a
destination, then press the knob.
You can save files in rows with a File ID of
"No File." Selecting a row with a specified
File ID name will overwrite the selected
file.
The File ID is generated automatically, but
you can modify it.
3
Turn the MENU knob to select [Execute]
on the confirmation message screen, then
press the knob.
[Note]
The current values and preset values are stored in an
ALL file.
If an error message appears
One of the following error messages may
appear during execution of the save, or as
soon as you select [Execute]. In this case, the
file is not saved.
Error
Problem
Solution
message
File Access
No recordable
Insert
NG
media is
recordable
inserted.
media.
Changing the File ID
1
Select File >All File >File ID in the setup
menu.
A screen for editing the File ID appears.
2
Select characters and enter the File ID.
3
Turn the MENU knob to select [Done],
then press the knob.
The File ID is updated.
Loading Configuration Data
1
Select File >All File >Load SD Card in the
setup menu.
An ALL file list screen appears.
2
Turn the MENU knob to select a file to
load, then press the knob.
A confirmation screen appears.
3
Turn the MENU knob to select [Execute],
then press the knob.
[Notes]
ˎ When you load a file from an SD card, the current
ˎ
values and preset values saved in the camcorder's
internal memory are overwritten.
ˎ Do not load a file on a device that is an older version
ˎ
than the device from which the file was saved. Doing
so could cause a malfunction.
ˎ The camcorder will reboot automatically after loading
ˎ
configuration data.
If an error message appears
One of the following error messages may
appear during execution of the load, or as
soon as you select [Execute]. In this case, the
file is not loaded.
Error
Problem
Solution
message
File Access
There is no
Insert the
NG
readable media
media that
The specified
contains the file
file does not
you want.
exist on the
media
Restoring All Current Settings to
Preset Values
In this document, initial setup menu settings
configured/saved by the user are referred to
as "preset values."
Even after loading files to set up the
camcorder, and overwriting original files with
new settings, you can reset the contents of
the files by recovering the preset values.
1
Select File >All File >All Preset in the setup
menu.
A confirmation screen appears.
2
Turn the MENU knob to select [Execute],
then press the knob.
Saving All Current Settings as
Preset Values
1
Select File >All File >Store All Preset in the
setup menu.
A confirmation screen appears.
2
Turn the MENU knob to select [Execute],
then press the knob.
[Note]
The camcorder will reboot automatically after executing.
Resetting Current Settings and
Preset Values to Factory Default
Settings
1
Select File >All File >Clear All Preset in the
setup menu.
A confirmation screen appears.
2
Turn the MENU knob to select [Execute],
then press the knob.
[Note]
The camcorder will reboot automatically after executing.
Advertisement
Table of Contents
