Table of Contents
Advertisement
94
7. Menu Display and Settings: Operation Menu
Operation >HDR Setting
Sets the 4K(QFHD) and HD recording and output system used during HDR operation. The color
space is ITU-R BT.2020 for HDR(HLG). The color space can be set to ITU-R BT.2020 or
S-Gamut3/S-Gamut3.Cine for HDR(S-Log3).
Item
Setting
4K(QFHD) Color
BT.2020/
Space
S-Gamut3(3200K)/
S-Gamut3(4300K)/
S-Gamut3(5500K)/
S-Gamut3.Cine(3200K)/
S-Gamut3.Cine(4300K)/
S-Gamut3.Cine(5500K)/
BT.709
HD Color Space
BT.2020/
S-Gamut3(3200K)/
S-Gamut3(4300K)/
S-Gamut3(5500K)/
S-Gamut3.Cine(3200K)/
S-Gamut3.Cine(4300K)/
S-Gamut3.Cine(5500K)/
BT.709
Operation >Format Media
Formats the media.
Item
Setting
Media(A)
Execute/Cancel
Media(B)
Execute/Cancel
SD Card(Utility)
Execute/Cancel
SD Card(Proxy)
Execute/Cancel
Description
Sets the 4K output color space.
S-Gamut3: Wide color space that covers
Sony's ITU-R BT.2020.
S-Gamut3.Cine: Color space adjustable for
digital cinema color space (DCI-P3).
The recommended settings based on the
white balance color temperature are as
follows.
3700K or lower: S-Gamut3(3200K) or
S-Gamut3.Cine(3200K)
3700K to 4700K: S-Gamut3(4300K) or
S-Gamut3.Cine(4300K)
4700K or higher: S-Gamut3(5500K) or
S-Gamut3.Cine(5500K)
[Note]
When S-Gamut3 or S-Gamut3.Cine is used, select
a setting according to the color temperature of the
shooting environment.
HD output color space (display only).
S-Gamut3: Wide color space that covers
Sony's ITU-R BT.2020.
S-Gamut3.Cine: Color space adjustable for
digital cinema color space (DCI-P3).
Description
Initializes the SxS memory card in slot A
(execute by selecting Execute).
Initializes the SxS memory card in slot B
(execute by selecting Execute).
Initializes the SD card in the UTILITY SD card
slot (execute by selecting Execute).
Initializes the SD card in the PROXY SD card
slot (execute by selecting Execute).
Operation >Input/Output
Sets input/output signals.
Item
Setting
Output Format
Settings vary according to the
system frequency setting.
Source Select
Camera/External
SDI Out1 Output
On/Off
SDI Out2 Output
On/Off
HDMI Output
On/Off
SDI Out/HDMI Super
Off/On
Operation >Super Impose
Sets character information/markers to be superimposed.
Item
Setting
Super(VF Display)
On/Off
Super(Menu)
On/Off
Super(Marker)
On/Off
Operation >LCD
Sets the LCD monitor.
Item
Setting
LCD Color
–99 to
±0
to +99
LCD Marker&Zebra
On/Off
Description
Selects the output format (execute by
selecting Execute).
Settings vary according to the recording
format setting (page 32).
Selects the camera picture (Camera) or SDI IN
connector input signal for the video input
source.
Turns the output signal from the SDI OUT1
connector on/off.
Turns the output signal from the SDI OUT2
connector on/off.
Turns the output signal from the HDMI
connector on/off.
Turns character information (superimposed)
from the SDI OUT 1/2 and HDMI connectors
on/off. However, when the signal format is
HD, character information output from the SDI
OUT1 connector is turned off regardless of this
setting.
Description
When Input/Output >SDI Out/HDMI Super is
set to On, this turns superimposition of
character information on the output from the
SDI OUT connectors on/off.
When Input/Output >SDI Out/HDMI Super is
set to On, this turns superimposition of
markers on the output from the SDI OUT
connectors on/off.
Description
Adjusts the color depth of the LCD monitor.
Turns the marker and zebra pattern display on
the LCD monitor on/off.
Advertisement
Table of Contents
