Sony PXW-Z750 Operating Instructions Manual page 143

143
10. Maintenance and Inspection: Error/Warning System
Warning message Warning sound WARNING
Insufficient Voltage Continuous
Clips Full Continuous
Last Clip Recording Intermittent
Clips Near Full Intermittent
Media(Proxy) Full Continuous
Clips(Proxy) Full Continuous
Media(Proxy) Near Full Intermittent
Last Clip(Proxy) Rec Intermittent
Clips(Proxy) Near Full Intermittent
Media(A) 1) Full Continuous
Media(A) 1) Clips Full Continuous
Media(A) Near Full Intermittent
1)
Media(A) Last Clip Rec Intermittent
1)
1) "(B)" is displayed for cards in slot B.
Tally/REC indicator Cause and Solution
indicator
On High-speed flashing The DC IN voltage is too low (level 2).
Recording is disabled.
Connect a different power source.
(The battery indicator flashes in the viewfinder.)
On High-speed flashing The maximum number of clips that can be recorded on an SxS memory card has been reached. Recording or copying
more clips is not possible. Replace immediately.
Flashing Flashing The clip currently recording is the last clip that can be recorded, as the maximum number of clips has been reached.
Prepare a new SxS memory card.
Flashing Flashing The number of additional clips that can be recorded on the SxS memory card is getting low.
Replace at the earliest convenience.
On High-speed flashing Proxy data cannot be recorded because there is no remaining free space on the proxy data SD card. Replace
immediately.
On High-speed flashing The maximum number of clips that can be recorded on the proxy data SD card has been reached. Recording more
clips is not possible. Replace immediately.
Flashing Flashing The remaining free space on the proxy data SD card is getting low.
Replace at the earliest convenience.
Flashing Flashing The proxy data currently recording is the last clip that can be recorded, as the maximum number of clips has been
reached.
Prepare a new proxy data SD card.
Flashing Flashing The number of additional clips that can be recorded on the proxy data SD card is getting low. Replace at the earliest
convenience.
On High-speed flashing When using the 2-slot Simul Rec function
On High-speed flashing When using the 2-slot Simul Rec function
Flashing Flashing When using the 2-slot Simul Rec function
Flashing Flashing When using the 2-slot Simul Rec function