Table of Contents
Advertisement
80
6. Clip Operations: Clip Operations on the Thumbnail Screen
11.
Special recording information
Displays the recording mode if the clip was
recorded using a special recording mode (Slow
& Quick Motion).
For Slow & Quick Motion clips, the [Recording
frame rate/Playback frame rate] are displayed
on the right.
12.
Clip duration
13.
Creation date
Selecting Clips
To select a clip thumbnail, do one of the
following to move the yellow cursor to the
thumbnail that you want to select.
ˎ Press theˎ, , , buttons.
ˎ
ˎ Turn the MENU knob.
ˎ
ˎ Press the PREV or NEXT button.
ˎ
Selecting the First Thumbnail
Press and hold the F REV button, and press the
PREV button.
Selecting the Last Thumbnail
Press and hold the F FWD button, and press
the NEXT button.
Playing Clips Sequentially Starting
from the Selected Clip
1
Select the thumbnail of the clip that you
want to play first.
2
Press the PLAY/PAUSE button.
Playback begins from the start of the
selected clip.
It plays all clips sequentially starting from the
selected clip.
When playback of the last clip finishes, the
camcorder switches to the camera image or
external input state.
Press the THUMBNAIL button to return to the
thumbnail screen.
[Notes]
ˎ Not all clips may be played back sequentially if the
ˎ
clips on the SxS memory cards were recorded with a
mixture of different recording formats.
ˎ Clips with an playback disabled icon (page 79)
ˎ
displayed on the thumbnail screen are not played.
The corresponding clips are skipped and sequential
playback continues.
ˎ There may be momentary picture breakup or still
ˎ
image display at the boundary between clips. During
this time, the play controls and the THUMBNAIL
button cannot be operated.
ˎ When you select a clip in the thumbnail screen and
ˎ
begin playback, there may be momentary picture
breakup at the start of the clip. To view the start of
the clip without breakup, put the camcorder into
playback mode, pause, use the PREV button to return
to the start of the clip, and start play again.
Pausing Playback
Press the PLAY/PAUSE button.
The PLAY/PAUSE indicator flashes while play
is paused.
Press the button again to return to play mode.
Playing at High Speed
Press the F FWD button (page 8) or the F
REV button (page 7).
To return to normal playback, press the PLAY/
PAUSE button.
Returning to the Start of the
Current Clip
Press the PREV button.
ˎ During playback, this jumps to the start of
ˎ
the current clip and starts playback.
ˎ During F FWD, this jumps to the start of the
ˎ
current clip and pauses playback.
ˎ During F REV or pause, this jumps to the
ˎ
start of the current clip and displays a still
image.
ˎ Each subsequent press of the button moves
ˎ
to the previous clip.
Playing from the Start of the First
Clip
Simultaneously press the PREV and F REV
buttons. This jumps to the start of the first clip
on the SxS memory card.
Jumping to the Start of the Next
Clip
Press the NEXT button.
ˎ During playback, this jumps to the start of
ˎ
the next clip and starts playback.
ˎ During F FWD, this jumps to the start of
ˎ
the next clip and pauses playback. During
playback of the last clip, this jumps to the
end of the clip and pauses playback.
ˎ During F REV or pause, this jumps to the
ˎ
start of the next clip and displays a still
image.
ˎ Each subsequent press of the button moves
ˎ
to the next clip.
Jumping to the Last Clip
Simultaneously press the F FWD and NEXT
buttons. This jumps to the last frame of the
last clip recorded on the SxS memory card.
Adding a Shot Mark during
Playback
You can add shot marks to clips during playback
by using the same method used during
recording (page 46).
[Note]
Shot marks cannot be recorded when the SxS memory
card is write protected.
Advertisement
Table of Contents
