Table of Contents
Advertisement
108
7. Menu Display and Settings: Maintenance Menu
Maintenance >Audio
Makes settings related to audio.
Item
Setting
Rear XLR Auto
On/Off
Front MIC CH1 Ref
–70dB/–60dB/–50dB/
–40dB/–30dB
Front MIC CH2 Ref
–70dB/–60dB/–50dB/
–40dB/–30dB
Rear MIC CH1 Ref
–70dB/–60dB/–50dB/
–40dB/–30dB
Rear MIC CH2 Ref
–70dB/–60dB/–50dB/
–40dB/–30dB
Line Input Ref
+4dB/0dB/–3dB/EBUL
Min Alarm Volume
Off/Set
Speaker Attenuate
Off/3dB/6dB/9dB/12dB
Headphone Out
Mono/Stereo
Reference Level
–20dB/–18dB/–16dB/
–12dB/EBUL
Reference Out
+4dB/0dB/–3dB/EBUL
CH1&2 AGC Mode
Mono/Stereo
CH3&4 AGC Mode
Mono/Stereo
AGC Spec
–6dB/–9dB/–12dB/
–15dB/–17dB
Description
Turns the automatic detection function on/off
for detecting cable connections on the AUDIO
IN CH-1/CH-2 connectors on the rear panel.
Selects the reference level of the front
microphone for channel 1.
Selects the reference level of the front
microphone for channel 2.
Selects the reference input level when the
AUDIO IN CH1 switch is set to MIC.
Selects the reference input level when the
AUDIO IN CH2 switch is set to MIC.
Selects the reference input level when the
AUDIO IN CH1 and AUDIO IN CH2 switches are
set to LINE.
Selects the volume when the ALARM knob is
turned all the way down.
Off: Inaudible
Set: Audible
Selects the volume from the monitor speakers
(does not affect earphone volume).
Selects whether the earphones are monaural
(Mono) or stereo (Stereo).
Sets the reference input level. It also sets the
output level of the 1 kHz test signal.
Sets the output level relative to the reference
input level.
Automatically adjusts the input level of
analog audio signals recorded on channels 1
and 2, and selects whether to make the
adjustments separately for each channel
(Mono) or in stereo mode (Stereo).
Automatically adjusts the input level of
analog audio signals recorded on channels 3
and 4, and selects whether to make the
adjustments separately for each channel
(Mono) or in stereo mode (Stereo).
Selects the AGC characteristic (saturation
level).
Maintenance >Audio
Makes settings related to audio.
Item
Setting
Limiter Mode
Off/–6dB/–9dB/–12dB/
–15dB/–17dB
Output Limiter
On/Off
CH1 Wind Filter
On/Off
CH2 Wind Filter
On/Off
CH3 Wind Filter
On/Off
CH4 Wind Filter
On/Off
1kHz Tone on Color
On/Off/Auto
Bars
MIC CH1 Level
Side1/Front/Front+Side1
MIC CH2 Level
Side2/Front/Front+Side2
Rear1/WRR Level
Side1/Front/Front+Side1
Description
Selects the limiter characteristic (saturation
level) for large input signals when adjusting
the audio input level manually. Select Off if
not using the limiter.
Turns the audio output limiter on/off.
Turns the channel 1 wind noise reduction filter
on/off.
Turns the channel 2 wind noise reduction filter
on/off.
Turns the channel 3 wind noise reduction filter
on/off.
Turns the channel 4 wind noise reduction
filter on/off.
Sets whether to output (On) or not output
(Off) a 1 kHz test signal in color bar mode.
Auto: Outputs a test signal only when the
AUDIO SELECT CH1 switch is set to AUTO.
Selects the knob for adjusting the audio level
when recording input audio from the front
microphone on channel 1.
Side1: LEVEL knob (left) on the side panel
Front: MIC LEVEL knob on the front panel
Front+Side1: LEVEL knob (left) and MIC LEVEL
knob (linked control)
Selects the knob for adjusting the audio level
when recording input audio from the front
microphone on channel 2.
Side2: LEVEL knob (right) on the side panel
Front: MIC LEVEL knob on the front panel
Front+Side2: LEVEL knob (right) and MIC
LEVEL knob (linked control)
Selects the knob for adjusting the audio level
of a wireless microphone or a device
connected to the AUDIO IN CH-1 connector on
the rear panel.
Side1: LEVEL knob (left) on the side panel
Front: MIC LEVEL knob on the front panel
Front+Side1: LEVEL knob (left) and MIC LEVEL
knob (linked control)
Advertisement
Table of Contents
