Table of Contents
Advertisement
57
5. Network Configuration
Connecting Devices using Wireless LAN
The camcorder can connect to smartphones,
tablets, and other devices using wireless LAN
connection by attaching the IFU-WLM3 USB
Wireless LAN Module (supplied) or CBK-WA02
Wireless LAN Adaptor (option).
The following operations can be performed
between the camcorder and devices
connected using a wireless LAN.
[Note]
USB wireless LAN modules/adaptors other than the IFU-
WLM3 or CBK-WA02 cannot be used.
Remote operation via wireless LAN
The camcorder can be operated remotely
from a smartphone, tablet, or computer that is
connected using a wireless LAN.
File transfer via wireless LAN
Proxy files (low-resolution files) stored on the
camcorder SD card and original files (high-
resolution files) recorded on the camcorder
can be transferred to a server via a wireless
LAN.
Monitoring video via wireless LAN
You can create a stream (H.264) of the camera
picture or playback picture of the camcorder for
monitoring from a device via wireless LAN using
the "Content Browser Mobile" application.
"Content Browser Mobile" is an application
that can operate the camcorder remotely on
the device screen, while streaming content,
and can be used to configure the camcorder.
You can also transfer a cutout part of a file by
specifying In and Out points in the proxy file
(page 66).
Always check that you have the latest version
of the "Content Browser Mobile" application.
For details about the "Content Browser Mobile"
application, contact your Sony sales or service
representative.
[Notes]
ˎ Proxy files (low-resolution files) recorded on the SD
ˎ
card in the camcorder can be streamed via a wireless
LAN.
ˎ Obstructions and electromagnetic interference
ˎ
between the camcorder and wireless LAN
access point or terminal device, or the ambient
environment (such as wall materials) could shorten
the communication range or prevent connections
altogether. If you experience these problems, check
the connection/communication status after moving
the camcorder to a new location, or bringing the
camcorder and access point/terminal device closer
together.
Compatible Devices
You can use a smartphone, tablet, or computer
to configure and operate the camcorder. The
supported devices, OS, and browsers are
shown in the following table.
Device
OS
Browser
Smartphone
Android 11/12
Chrome
iOS 15.x
Safari
Tablet
Android 10/11
Chrome
iPadOS 15.x
Safari
Computer
Microsoft
Chrome
Windows 10/11
macOS 12.x
Safari
[Notes]
ˎ The picture may not be depicted correctly, depending
ˎ
on the version of your browser.
Operation with the following browser versions has
been verified.
Safari: 15
Chrome: 103
ˎ Playback may not be supported, depending on the
ˎ
operating system of the terminal device used and the
browser version. If this occurs, use "Content Browser
Mobile."
Attaching the IFU-WLM3
1
Open the cover of the USB wireless LAN
module connector.
Guard (supplied)
2
Attach the protective cap to the IFU-
WLM3.
3
Plug the IFU-WLM3 into the connector.
[Note]
Always turn the camcorder off before connecting or
removing the IFU-WLM3.
If not using the IFU-WLM3
Unscrew the two screws, remove the guard,
and close the connector cover.
Attaching the CBK-WA02
1
Attach the attachment bracket to the
handle in the position shown in the
following diagram.
For attachment of the attachment bracket
(Service Part No. A-2092-367-), contact a
Sony service representative.
Attachment bracket
2
Attach the USB extension adaptor,
supplied with the CBK-WA02 (option), to
the attachment bracket.
3
Turn the fixing screw clockwise to secure
the USB extension adaptor.
Advertisement
Table of Contents
