Table of Contents
Advertisement
147
11. Appendix: Messages Displayed During Operation
Operation
Assignable switch assigned with ATW Hold
function was operated
Assignable switch assigned with Clip
Continuous Rec was operated
Assignable switch assigned with Picture
Cache Rec was operated
Assignable switch assigned with Streaming
was operated
Message
ATW Hold
ATW Hold Off
Cannot Proceed
Recording
Cannot Proceed
Cannot Proceed
Recording
Cannot Proceed
Cannot Proceed
Network Client Mode Setting is "On"
Cannot Proceed
Network Function is Disabled
Cannot Proceed
Network Client Mode Setting is "On"
Network Function is Disabled
Cannot Start Streaming
Streaming Disabled Temporarily
Cannot Start Streaming
Please stop Recording or Playback
Meaning and possible cause
ATW Hold function was enabled.
ATW Hold function was disabled.
Cannot execute because recording is in progress.
Cannot execute because a CA-FB70/TX70 Camera Adaptor is connected to the CCU.
[Note]
Connection of a camera adaptor is supported on the Japanese model only.
Cannot execute because recording is in progress.
Cannot execute because of the following conditions.
ˎ Playback is in progress
ˎ
ˎ Thumbnail screen is displayed
ˎ
ˎ CA-FB70/TX70 Camera Adaptor is connected to the CCU.
ˎ
[Note]
Connection of a camera adaptor is supported on the Japanese model only.
Cannot execute because network client mode is enabled.
Cannot execute because network connection setting is set to Off.
Network client mode is set to On, but cannot execute because network connection is unavailable.
Cannot execute because of the following conditions.
ˎ Proxy data playback is in progress
ˎ
ˎ 1280×720 clip playback is in progress with recording format set to 1920×1080
ˎ
ˎ 1920×1080 clip playback is in progress with recording format set to 1280×720
ˎ
Cannot execute because recording/playback was started while wireless function circuitry was initializing (including
thumbnail display).
Stop recording/playback (including thumbnail display) to enable execution.
Advertisement
Table of Contents
