Connecting To Your System Using Ddns; Cms Software Or Mobile Apps - FLIR DNR100 SERIES Instruction Manual

20 Setting Up DDNS Service
6.1. Ensure Enable is checked. The checkbox will be white when DDNS is enabled.
6.2. Under Domain Name, enter the Domain Name from the confirmation email you
received after registering for DDNS.
6.3. Under User ID, enter the User Name from the confirmation email.
6.4. Under Password, enter the Password from the confirmation email.
NOTE
The DDNS user name and password is different from your DVR's user name and password.
See for your DDNS user name and password if you previously recorded it in this manual.
7. Click OK.
8. Click Save.
NOTE
It may take between 10~15 minutes for the DDNS server to update with your new DDNS address.

20.3 Connecting to your system using DDNS

NOTE
You must port forward ports on your router to NVR's IP address (by default, ports 35000 and 80) to con-
nect to your system over the Internet.
Now that you have set up your system for DDNS, use the following address formats to
connect:

20.3.1 CMS Software or Mobile Apps

Example DDNS address to connect using CMS or app
tomsmith.myddns-flir.com
• For details on the CMS Software, .
• For details on mobile apps, .
#; r. 2.0/23313/23313; en-US
141