Stacker Wheel Setup For Thick Paper; Removing Outfeed Cover - Formax FD 342 Operator's Manual

STACKER WHEEL SETUP FOR THICK PAPER

Thicker paper from 28 # up to 65 # may require special stacker
Position 1
wheel setup moving the stacker wheels closer than the position
"A" slot.
If stacking is inconsistent move the stacker wheels from the
standard position #1 (Fig. 12a) to the thick paper weight posi-
tion #2 (Fig. 12b) as indicated in the pictures below, position # 2
may also be good for small folded documents.
Fig. 12a - Standard Stacker Wheel Position
Position 2
Fig. 12b - Thick Paper Weight Position

REMOVING OUTFEED COVER

Outfeed cover
The outfeed cover can be removed to access the exit roller.
To remove, unscrew thumbscrews that hold the cover in place
(Fig. 13)
Fig. 13
Thumbscrews
8