Table of Contents
Advertisement
Chapter 1 Before Operation
2.
Names and Functions of Components
2-1.
External parts
[8]
[11]
[10]
No.
[1]
Folding plate 1
[2]
Control panel
[3]
Separating air adjustment
[4]
Separator adjustment
[5]
Power switch
[6]
Skew correction knob
[7]
Side guide unit
[8]
Long paper guide
[9]
Plate unit
[10]
Trail edge guide unit
[11]
Auxiliary paper feed tray
[12]
Paper feed tray
[13]
Paper feed guide
[14]
Guide fixing screw
[15]
Top cover
[16]
Side air
4
[15]
[14]
[13]
[16]
[12]
[7]
[8]
[9]
Name
[7]
[6]
[5]
Guide plate for deciding the paper folding position.
Use this panel to enter information to operate the machine
For adjusting the separating air amount.
For adjusting the height of the separator.
"1. Turning On/Off Power" (p.33)
Use this knob to correct the folding misalignment in both directions.
Use this guide to hold both sides of paper when stacking long size
paper.
Use this paper guide when the paper length exceeds 457.2 mm/18
inches.
Use this unit to send separating air toward the rear end of paper
when stacking long sheets of paper.
Holds the back edge of paper stacked on the paper feed tray.
For stacking paper on the paper feed tray in a stable condition. Do
not lean on the auxiliary paper feed tray or hold on to it to lift up the
machine.
For stacking the paper to be folded. Do not lean on the paper feed
tray or hold on to it to lift up the machine.
Holds both sides of paper when the paper is stacked on the paper
feed tray.
For securing the paper feed guide.
Safety cover to prevent the user from touching the moving parts.
Improves paper separation and paper feeding.
[1]
[2]
[3]
[4]
Function
(p.9)
.
Advertisement
Table of Contents
