Quantum SNC 4000 User Manual page 99

0009 FEB 21 2002 17:58:13
1 fMax 254 RstI 0
loggerDumpCurrent [level]
Dump records from the system event log to the console with the loggerDumpCurrent command. Only
records logged since the system was booted are dumped. Level specifies the event log level for the events
as follows:
Number Level
0 Notice
1 Warning
2 Information
SNC4000 > loggerDumpCurrent 2
*** Dumping 5 current records (of 13 total) with level <= 2 ***
SEQUENCE TIME
0007 FEB 26 2002 19:01:14
0010 FEB 26 2002 19:01:14
index 0
, handle 0x08fda380
0012 FEB 26 2002 19:01:26
index 1
, handle 0x09ffcf08
0013 FEB 26 2002 19:01:27
value = 0 = 0x0
SNC4000 >
ls or ll
The SNC 4000 contains a file system in its flash memory. Use the ls command to display the files as shown
below.
SNC4000 >ls
license.dat
sna.rc
vxWorks.stvalue = 0 = 0x0
To obtain detailed information about the file, use the ll command instead.
macShow
The macShow command displays the Media Access Control (MAC) address for the Ethernet interface.
SNC4000 > macShow
Enet MAC Address: 0.60.45.d.0.80
value = 33 = 0x21 = '!'
SNC 4000 User's Guide
14 System 0: ES 1 CC 0/0 Prd 2 Snp 1 HP
Explanation
Events recorded in the Event Log but not displayed by
the Event Viewer
Includes events that should always be reported, such
as device removals, and changes to temperature or
power systems
Includes events that might result in later problems
CODE
28
29
29
70
DESCRIPTION
USCSI 2: Bus RESET
Mapping 1: Target Device Added:
Mapping 1: Target Device Added:
NOTICE: Reboot Complete
93