Quantum SNC 4000 User Manual page 121

SNC4000 > sncFeatureEnable "enable"
value = 0 = 0x0
Data Mover Module License is Valid
If value = 1 = 0x1 message is displayed, it means the license is already installed and Data Mover
Module is already enabled.
If the value = -1 = 0xffffffff message is displayed, it means the license is not already installed
and you do need to enter the license key.
snmpCommunitiesShow
The snmpCommunitiesShow command displays the list of SNMP community strings in use by the SNC
4000.
SNC4000 > snmpCommunitiesShow
ReadCommunity
-----------------------------
pub 1
ReadCommunity
-----------------------------
public 1
icmp 2
WriteCommunity
-----------------------------
priv 1
private 1
TrapCommunity
------------------------------
private
value = 9 = 0x9
SNMP community strings serve to group network devices into logical collections for management purposes.
The community string must match on both the ADIC Management Console Server and the SNC 4000 you
wish to manage. The default settings do match. Use the ADIC Management Console to view or edit strings
that apply to the Server.
For more information, see the ADIC Management Console User's Guide.
To view or edit strings that apply to the SNC 4000, use the snmp... commands explained below.
snmpHelp
The snmpHelp command displays a list of the snmp commands.
SNC4000 > snmpHelp
snmpCommunitiesShow
snmpReadCommunityAdd "string"
snmpReadCommunityRemove "string"
snmpTrapCommunitySet "string"
snmpWriteCommunityAdd "string"
snmpWriteCommunityRemove "string"
trapDestAdd "ipaddress"
trapDestRemove "ipaddress"
trapDestShow
See User's Guide for more information
value = 0 = 0x0
SNC 4000 User's Guide
ViewIndex
ViewIndex
ViewIndex
115