Table of Contents
Advertisement
Value
5
7
8
10
11
14
15
SNC > vpsDefaultInbandAccessGet 1
Read Access:
Self:
1, 3rd Party:
Write Access:
Self:
0, 3rd Party:
value = 3 = 0x3
SNC > vpsDefaultInbandAccessSet 15
value = 0 = 0x0
SNC > vpsDefaultInbandAccessGet 1
Read Access:
Self:
1, 3rd Party:
Write Access:
Self:
1, 3rd Party:
value = 15 = 0xf
To set the in-band access level for a particular host, use the
vpsFeatureDisable
The vpsFeatureDisable command disables the eVPS feature. It erases the appropriate configuration
file, and reboots the appliance. No provision is made to restore the existing configuration. Users should save
the appliance configuration before disabling the feature.
For more information, see
SNC > vpsFeatureDisable
All VPS and eVPS configuration information will be lost,
the features disabled, and the system will be atuomatically rebooted!
Do you want to disable VPS and eVPS? (y or n) y
vpsFeatureEnable "license key string"
The vpsFeatureEnable command enables the optional VPS or eVPS feature. You enable these features
by entering the unique license key.
SNC > vpsFeatureEnable "BVRXC-G79DN"
value = 0 = 0x0
SNC >
If the license key was factory-installed, you can enter the word "enable" rather than the actual license key.
SNC > vpsFeatureEnable "enable"
value = 0 = 0x0
eVPS License is Valid
SNC >
SNC 4000 User's Guide
Meaning
Self-read + self-write
Self-read + 3rd-Party read + Self-write
3rd Party write
3rd-Party read + 3rd-Party write
3rd-Party read + 3rd-Party write + Self-read
3rd-Party read + 3rd-Party write + Self-write
Self-read + 3rd-Party read + Self-write + 3rd Party write
1
0
1
1
Saving a Configuration File
vpsHostInbandAccessSet 1,[setting]
on page 17.
command.
127
Advertisement
Table of Contents
