Quantum SNC 4000 User Manual page 93

sysVpdShowAll
targets
uptime
See User's Guide for more infomation
value = 39 = 0x27 = '''
hlthChkHelp
The hlthChkHelp command displays a list of the Health Check commands.
SNC4000 > hlthChkHelp
hlthChkIntervalGet
hlthChkIntervalSet <interval> - Set Check Interval
hlthChkLevelGet
hlthChkLevelSet <level>
hlthChkNow
See User's Guide for more information
value = 0 = 0x0
hlthChkIntervalGet
The current Health Check interval can be viewed using the hlthChkIntervalGet command. The
example below shows the current interval is 60 minutes.
SNC4000 > hlthChkIntervalGet
value = 60 = 0x3c = '<'
hlthChkIntervalSet
The Health Check interval controls how often the Health Check process runs. The interval may range from
1 to 65,535 minutes (about 45 days). Set the interval using the hlthChkIntervalSet command.
SNC4000 > hlthChkIntervalSet 60
value = 0 = 0x0
hlthChkLevelGet
To display the current Health Check level, use the hlthChkLevelGet command. The example below
shows that the current level is 2.
SNC4000 > hlthChkLevelGet
value = 2 = 0x02
hlthChkLevelSet
To set the Health Check level, use the hlthChkLevelSet command. The example below shows setting
the level to 3.
SNC4000 > hlthChkLevelSet 3
value = 0 = 0x0
hlthChkNow
The hlthChkNow function causes the SNC 4000 to execute an immediate, level 4 Health Check. Results
are displayed that will indicate which devices or subsystems failed the check.
SNC 4000 User's Guide
Display Vital Product Data for all subsystems
List all known target devices
Display time since last boot
- Show Check Interval
- Show Check Level
- Set Check Level
- Run Health Check Now
87