Quantum SNC 4000 User Manual page 118

80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
96: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
112: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
128: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
144: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
160: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
176: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
192: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
208: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
224: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
240: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
value = 0 = 0x0
sfmInactiveSet
The sfmInactiveSet command de-activates SFM making all LUNs available to all host connections.
This command typically would be used when troubleshooting a SAN configuration. It removes SFM access
control without deleting SFM access settings. Use the sfmActiveSet command to re-activate SFM.
SNC4000 > sfmInactiveSet
value = 0 = 0x0
If SFM is already inactive, the following is displayed.
SNC4000 > sfmInactiveSet
SFM: Already Inactive
value = 23 = 0x17
sfmNameSet [hostindex],"name string"
The sfmNameSet command sets the host name field to the specified "name string" for the specified host
connection index. The following command example shows setting the host name for host Id 1 to
"LANDERS". Existing hostindex and name values can be determined by looking at the "Id" and "Host Name"
columns in the output of the sfmShow -1 command.
SNC4000 > sfmNameSet 1,"LANDERS"
value = 0 = 0x0
sfmShow [hostIndex]
The sfmShow command displays information about hosts that have been registered with Scalar Firewall
Manager based on the value of hostIndex.
Hostindex Meaning
-1 Displays brief list of all known host connections
0 Full display of all known host connections, and if online displays a list
of all LUNs available to that connection
N (1-48) Display the full information for the host N only
The following command example shows SFM information for the hosts that have been registered by SFM.
Hosts that have the Host Registration Service running with periodic re-registration are shown with a status
of Periodic. One of the hosts has more than one FC connection to the SNC 4000.
SNC4000 > sfmShow -1
SFM State: Active
Id World Wide Name St. Typ HexFlags Status Host Name Host Type Host
112 Service Port Command Reference