Table of Contents
Advertisement
If value = 1 = 0x1 message is displayed, it means the license is already installed and VPS or eVPS is
already enabled.
If the value = -1 = 0xffffffff message is displayed, it means the license is not already installed
and you do need to enter the license key.
See also the licenseShow command.
vpsFileShow
The vpsFileShow command shows the VPS or eVPS data stored in the file.
SNC > vpsFileShow
VPS File: '/nvfs/config/iac.pif'
MagicNumber = 0xfacade03, State = 2, Hosts = 3, Writes = 14.
VPS License Key = "MDDVHH-MX9XXXx"
State = 0, Type = 1, Flags = 0xffc00001, Offline
WWN:
Name:
Host Type: 'Windows 2000 SP 1'
Device Id: 'FC 1'
LUN Access:
0: 01 01 01 01 00 00 00 00 00 00 00 00 00 00 00 00
16: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
32: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
48: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
64: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
LUN MAP:
0: 0000 0001 0002 0004 ffff ffff ffff ffff ffff ffff ffff ffff ffff
ffff ffff
ffff
16: ffff ffff ffff ffff ffff ffff ffff ffff ffff ffff ffff ffff ffff
ffff ffff
ffff
32: ffff ffff ffff ffff ffff ffff ffff ffff ffff ffff ffff ffff ffff
ffff ffff
ffff
48: ffff ffff ffff ffff ffff ffff ffff ffff ffff ffff ffff ffff ffff
ffff ffff
ffff
64: ffff ffff ffff ffff ffff ffff ffff ffff ffff ffff ffff ffff ffff
vpsHostInbandAccessGet [hostIndex],1
The vpsHostInbandAccessGet command displays the current in-band access settings for a particular
host. To view the default setting for all hosts, use the sfmFileShow command.
Existing hostIndex values can be determined by looking at the "Id" column in the output of the
[hostIndex]command.
For more information about the verbosity argument, refer to the sfmFileShow command.
SNC > vpsHostInbandAccessGet 1,1
Read Access:
Self:
1, 3rd Party:
Write Access:
Self:
0, 3rd Party:
value = 3 = 0x3
128
00000060:45abcdef
'ASAHI'
1
0
sfmShow
Service Port Command Reference
Advertisement
Table of Contents
