Figure 15 Single Wire Scsi Configuration (Default) - Quantum ACL 4/52 Installation Manual

Appendix A SCSI Cabling Options
Figure 15 Single Wire
SCSI Configuration
(Default)
Tape Drive 0
*SCSI Address 2
Tape Drive 1
*SCSI Address 3
Tape Drive 2
*SCSI Address 4
Tape Drive 3
*SCSI Address 5
* - Indicates the "default" SCSI ID of the installed devices
30
Robotics
Controller
*SCSI Address 0
Tape Drive
Interface PWA
The SCSI configuration of the tape drives and library can be changed
according to your needs by using the cable provided in the accessories
kit shipped with each library unit.
ACL 4/52 Facilities Planning and Installation Guide
EXTERNAL REAR PANEL
SCSI Termination
SCSI PORT 4
Host Connection
SCSI PORT 3
SCSI Termination
SCSI PORT 2
Host Connection
SCSI PORT 1