Table of Contents
Advertisement
Reinstalling the Left
2
Cosmetic Panel
Do not be concerned if the customer does not have all the cartridges
needed to fill the library. Additional cartridges can be added after
installation using the load port. For more information about this
procedure, refer to the Enterprise Tape Library 4/1800 Operator's Guide.
Note: Whenever possible, try to fill the library completely with properly
labeled tape cartridges. A full library of labeled cartridges takes much
less time to inventory than a partially filled library or a library filled
with unlabeled cartridges.
To reinstall the left cosmetic panel:
1 Rest the top lip of the left panel on top of the library frame.
2 Push the panel toward the front of the library and insert the frame
buckles into the retention tabs.
3 At the back of the library, insert the tighten the three screws that
secure the left panel to the back of the library frame.
ACL 4/52 Facilities Planning and Installation Guide
Chapter 2 Unpacking the Library
Removing Internal Packing and Inserting Tape Cartridges
15
Advertisement
Table of Contents
