Library Specifications; Figure 1 Library Mechanical Specifications; Figure 2 Library Power Specifications; Figure 3 Library Environmental Specifications - Quantum ACL 4/52 Installation Manual

Automated tape library for dlt cartridges
Hide thumbs Also See for ACL 4/52:
Table of Contents

Advertisement

Chapter 1 Installation Requirements

Library Specifications

Figure 1 Library Mechanical
Specifications
Height
Width
Depth
Weight
Figure 2 Library Power
Specifications
AC Power Rating
AC Voltage Range
Frequency Range
Figure 3 Library Environmental
Specifications
Temperature:
Relative
Humidity:
Altitude:
Heat
Dissipation:
Library Specifications
The tables in this section provide the mechanical, power, and
environmental specifications for the Enterprise library. Use these
specifications to help select an appropriate installation site and
environment.
44 inches (111.76 cm)
21.5 inches (54.61 cm)
31.12 inches (79.04 cm)
361 lbs. (164 kg) with 4 tape drives and 52 DLT cartridges
100–120V/200-240V, 4A/2A, 50/60 Hz
90–132 VAC or 180–264 VAC
47–63 Hz
Storage—Short-Term (<60 Days)
Storage—Long-Term (>60 Days)
Transport
Operating
Non-Operating (Storage)
Non-Operating (Transport)
Operating
Short-Term (<60 days in storage)
Long-Term (>60 days in storage)
Operating
Operating
ACL 4/52 Facilities Planning and Installation Guide
-40 to 151 F (-40 to 66 C)
41 to 122 F (5 to 50 C)
-40 to 151 F (-40 to 66 C)
59 to 90 F (15 to 32 C)
95% (Wet bulb temp = 90 F/32 C)
95% (Wet bulb temp = 115 F/46 C)
20–80% (Wet bulb temp =
77 F/25 C)
12,000 ft (3,658 km)
12,000 ft (3,658 km)
6,562 ft (2.0 km) @ 76 F Max.
& 589 mmHg
880 BTU/hr (220 KCal/hr or 260
watts)
1

Advertisement

Table of Contents
loading

Table of Contents