To Load Available Tape Cartridges; Figure 12 Removing The Foam Blocks; Figure 13 Tape Cartridge Orentation - Quantum ACL 4/52 Installation Manual

Chapter 2 Unpacking the Library
Removing Internal Packing and Inserting Tape Cartridges
Figure 12 Removing the
Foam Blocks
Horizontal Carriage
Foam Block
Horizontal Carriage
Foam Block
TA00136a
To Load Available
2
Tape Cartridges
Figure 13 Tape Cartridge
Orentation
14
Top
Bottom
Vertical Carriage
Foam Block
If the customer has tape cartridges available for loading at this time, it
is best to do this while the side panel is removed. You can insert up to
48 cartridges directly into empty bins in the fixed storage array.
Figure 13 shows how cartridges should be oriented before insertion
into a bin.
Cartridge Bar Code Label
ACL 4/52 Facilities Planning and Installation Guide
Horizontal
Carriage
Extension Axis
Vertical Carriage
ESD Ground Jack
(On Lower Panel Tab)
To the Bin
DLT Cartridge