Quantum ACL 4/52 Installation Manual page 64

Glossary
F
G
H
L
N
O
48
extension axis assembly Mounted onto the vertical axis,
the extension axis assembly consists of the gripper
assembly and the horizontal axis on which the gripper
assembly is mounted.
extension axis belt The drive belt connecting the
extension motor/gearbox to the gripper.
FCC Class A Standard established by the U.S. Federal
Communications Commission governing electromagnetic
emissions.
FSA Fixed storage array. This is a 3-column by 16-row
fixture mounted inside the library. Its purpose is to store up
to 48 cartridges in the library.
FSE Field service engineer
gripper assembly The assembly that mounts on the
extension axis and grips cartridges, referred to as the
gripper.
horizontal belt The drive belt connecting the horizontal
motor to the horizontal axis assembly.
host Host computer
host computer The computer that issues SCSI commands
to control the library robotics.
Load Port The operator accessible component of the
library that allows up to four cartridges to be
import/export loaded and unloaded into/from the library.
NVRAM Nonvolatile RAM
offline Not ready for communications with a host. This
mode is required for configuration, diagnostic, and
maintenance operations.
ACL 4/52 Facilities Planning and Installation Guide