Removing The Foam Blocks; Figure 11 Removing Tie-Wraps - Quantum ACL 4/52 Installation Manual

Figure 11 Removing Tie-
Wraps
Horizontal
Carriage
Tie-Wraps
TA00046d
Removing the Foam
2
Blocks
Extension Axis
Tie-Wrap
Extension Axis
Platform
Vertical Carriage
Tie-Wrap
H
H
To remove the foam blocks:
1 Use an antistatic wrist band and take any other available antistatic
precautions.
2 Gently slide the horizontal carriage toward the front of the library.
3 Remove the top and bottom horizontal carriage foam blocks.
4 Gently raise the vertical carriage and remove the vertical carriage
foam block.
5 Save all the blocks for future use.
ACL 4/52 Facilities Planning and Installation Guide
Chapter 2 Unpacking the Library
Removing Internal Packing and Inserting Tape Cartridges
Bumper Standoff
Gripper Motor
VIEW H-H
13