Table of Contents
Advertisement
Chapter 2 Unpacking the Library
Removing Internal Packing and Inserting Tape Cartridges
Figure 10 Removing the
Left Panel
Left Panel
Removing the Tie-
2
Wraps
12
To remove the tie-wraps:
Note: Do not cut the tie-wraps; they must be reused when packaging the
library for reshipment.
1 Use an antistatic wrist strap and take any other available antistatic
precautions.
2 Using figure 11, locate tie-wraps securing the horizontal carriage,
the vertical carriage, and extension axis.
3 To remove each tie-wrap, push on the release tab near the tie-wrap
buckle and then slide the end of the tie wrap out of the buckle.
Repeat this step until you have removed all three tie-wraps.
4 Save all tie-wraps for future use.
ACL 4/52 Facilities Planning and Installation Guide
Left Panel
Retention Tabs
TA00137a
Advertisement
Table of Contents
