To Connect The Power Cord And Turn On The Hp E3472A/73A Emulator - HP E3473A User Manual

Setting up the Emulator

To connect the power cord and turn on the HP E3472A/73A Emulator

To connect the power cord and turn on the
HP E3472A/73A Emulator
The HP E3472A/73A Emulator does not have an On/Off switch. To turn the
HP E3472A/73A Emulator on or off, plug or unplug it from the power supply.
Plug the power cable into the adapter and outlet.
1
Connect the 5-V power cable to the receptacle in the rear panel of the
2
HP E3472A/73A Emulator.
N o t e
The power lights on the emulation controller and the emulation probe are lit,
indicating the HP E3472A/73A Emulator is powered on. Note that the
Emulator does not have power switch.
16