Cartridge Or Ribbon Recognition Problems - Primera SignatureEVO User Manual

7. Finally, if the slide is broken you can remove it using the bottom catch bin. Pick up the slide printer and
rotate it in multiple directions until all of the pieces are in the bin. Now pull out the bin and empty it into
the trash.
Catch Bin
3H. Cartridge or Ribbon Recognition Problems
If your cartridge or ribbon is installed but the blue LED light behind the cartridge does not turn on or the
software says no cartridge or ribbon is installed, you may need to clean the copper chip on the ribbon or slide
cartridge with an alcohol wipe.
Page | 30