•
•
Secure Sockets Layer (SSL) Certificates
Extron control products ship with factory-installed SSL certificates created by Extron. If you
want or are required to use a different SSL certificate at your installation site, then you can
use system utilities in the Toolbelt software to change the SSL certificate at any time. The
Toolbelt Help File provides instructions on how to apply an SSL certificate to a device such
as the HCR or a control processor.
NOTES:
IP Link Pro controllers and devices such as the HCR 102 support standard OpenSSL
certificate encodings such as .pem (Privacy-enhanced Electronic Mail) and .der file types.
PEM file types are ASCII encoded and are the required format for uploading to the HCR 102
receiver. DER (Distinguished Encoding Rules) file types are binary encoded and can typically
have several file extension variations, such as .crt and .cer. There are many standard tools
that can convert from DER to PEM file encodings if needed.
NOTE: A DER format file must be converted to PEM encoding before uploading it to the
To properly create the certificate for uploading to Extron control devices, ensure that the
certificate file meets the following requirements:
•
•
•
NOTE: ITU-T standard X.509 covers aspects of public key encryption, digital
Contact your IT administrator for more information on what tools and policies are required to
obtain or create the SSL certificate and, if necessary, the corresponding passphrase.
.glta — This is a GUI layout template.
.pkp — This is for Ethernet, serial, and CEC drivers.
You must run Toolbelt as an administrator.
•
Some certificates require a passphrase that is created when the certificate is
•
created. If a passphrase is required, you must enter that passphrase before
uploading and applying the certificate.
unit.
Contains X.509 certificate information
Contains public and private keys
Uses PEM encoding
cryptography, certificates, and validation.
HC 400 Series • Reference Information
70
Need help?
Do you have a question about the HC 400 Series and is the answer not in the manual?