Step 8 - Test And Troubleshoot The System; Step 9 - Mount The Hct 102 D, Hct 101 D, Hct 101 Eu, Or Hct 101 Mk - Extron electronics HC 400 Series User Manual

c. Add any optional touchpanels or NBP button panels and set them up:
•
•
2. Save and build the project.
3. Upload the system configuration to the HCR 102 receiver.
Step 8 — Test and Troubleshoot the System
…
Test the system. See the
of items to check during system troubleshooting.
…
Make adjustments to wiring or configuration as needed.
Step 9 — Mount the HCT 102 D, HCT 101 D, HCT 101 EU, or HCT 101 MK
… See Mounting the HCT 102 D, HCT 101 D, HCT 101 EU, or HCT 101 MK
on page 72.
Create the GUI configuration for the touchpanels and add it to the project.
Configure functions, monitors, or schedules for the touchpanels or NBP button
panels and their buttons.
Troubleshooting
HC 400 Series • Hardware Features and Installation
section starting on page 77 for an outline
starting
12