Extron electronics HC 400 Series User Manual page 58

NOTES:
HCR 102 can only de-embed digital 2Ch PCM audio to the analog audio
•
output. It cannot de-embed multi-channel audio.
Input 2 for an HC 402 EU/MK system can be set to LPCM-2Ch Auto or Multi-
•
Ch Auto. However, EU and MK models use only digital audio because there is
no analog audio input on the transmitter. That feature can be fully utilized by the
HC 402.
• Program Volume — Press the navigation buttons to set the program volume (in percent).
NOTE: The output volume control in the PCS software and in the OSD menu
applies to the analog audio output only. The output level for the HDMI embedded
audio is fixed and cannot be adjusted.
Output Format — Press the navigation buttons to set the audio output format (L + R
•
program audio [mono], or stereo).
HC 400 Series • Operation 50