Configuration And Adjustment Buttons - Extron electronics HC 400 Series User Manual

Audio input signal LEDs (LPCM-2Ch and Multi-Ch)— These two LEDs
E
on the receiver (see
or absence of the specific types of audio signal on the selected (active)
input.
LED Type
LPCM-2Ch An embedded
Multi-Ch

Configuration and Adjustment Buttons

For information on how to use these buttons with the on-screen display (OSD), see
Menu Navigation
F Menu and
to access the OSD and make selections from the
submenus.
H
Navigation buttons (, ,
— Press these buttons to navigate through the OSD
submenus, lock the front panel, and reset the output
rate (hold
figure 5, , on page 13) indicate the presence
E
Audio Input LED State and Indication
On (Lit Steadily)
•
LPCM-2Ch audio
signal is present on
•
the selected HDMI
•
TMDS input.
Multi-Ch or •
bitstream (non-PCM)
audio is present on
•
the selected HDMI
•
TMDS input.
on page 42
G Enter buttons — Press these buttons
, and


for 5 seconds).
HC 400 Series • Hardware Features and Installation
Off (Unlit)
There is no LPCM-2Ch audio signal in the
selected TMDS input.
There is no TMDS signal on the selected input.
The audio embedded in the selected input is in
Multi-Ch format.
There is no Multi-Ch audio signal in the
selected TMDS input.
There is no TMDS signal on the selected input.
The audio embedded in the selected input is in
LPCM-2Ch format.
Menu
button
MENU

arrow buttons)
ENTER
Enter
button
AUDIO
LPCM-2CH
MULTI-CH
OSD
HOLD FOR 720p/1080p
HCR 102
Navigation
buttons
15