Grandstream Networks GVC3200 Administration Manual page 64

password. If it is missed or does not match the password, the device will not apply the
configuration in the config file. The default setting is "No".
It is used to download the device configuration file in text format. The config file
Download Device
includes all the P value parameters for device's current settings except password for
Configuration
security purpose.
Upload Device
It is used to upload the configuration file to the device.
Configuration
Always send HTTP It is used to set if the device includes the credential information in the HTTP/HTTPS
Basic request messages to download the cfg.xml file. If it is set to "Yes ", the credential
Authentication information will always be included in the HTTP/HTTPS messages regardless the
Information server's challenge. The default setting is "No".
CUST File
GUI customization This setting defines the server path for the GUI customization file where the GVC320x
file URL will download it from. Default value is fm.grandstream.com/gs.
GUI customization
Select the GUI customization file download mode: "HTTP", "HTTPS" or "TFTP".
file download mode
GUI customization
Enter the username to access the HTTP/HTTPS server to download cust file, if
file HTTP/HTTPS
required by the server.
username
GUI customization
Enter the password to access the HTTP/HTTPS server to download cust file, if
file HTTP/HTTPS
required by the server.
password
Use Configurations
If selected, the GVC3200/GVC3202 will download the cust file in the same way as
of Config File
retrieving configuration file, i.e., same server and downloading mode, etc.
Server
Automatic Upgrade
Enables automatic upgrade and provisioning. The default setting is "Check Every
Day". If set to "Check Every Day", "Check Every Week" or "Check at a Period Time",
Automatic Upgrade
fill in time interval below for upgrade. The shortest time interval is 60 minutes. If set to
"No", only upgrade when reboot the device.
Defines the hour of the day (0-23) to check the HTTP/TFTP server for firmware
Hour of the Day
upgrades or configuration files changes. This option is available when "Automatic
(0-23)
Upgrade" is set to "Check Every Day ". The default setting is "1".
It is used to define the rules for automatic upgrade on the device.
It can be selected from the following:
• Always Check at bootup
Firmware Upgrade
• Always Check at bootup, when F/W pre/suffix changes,
and Provisioning
• Skip the Firmware Check.
The default setting is "Always Check at bootup".
GVC3200/3202 Administration Guide
Version 1.0.3.64
P a g e | 64