Device Manager
•
Disable Missed Call OLED Indicator
If set to "Yes ", when the device has a missed call, the OLED on the front panel will not display missed
calls. The default setting is "No".
•
Disable MWI OLED Indicator
If set to "Yes ", when the device has an unread voice message, the OLED on the front panel will not
display messages. The default setting is "No".
•
Disable New Message OLED Indicator
If set to "Yes ", when the device has an unread message, the OLED on the front panel will not display
messages. The default
•
Disable Contact Full OLED Indicator
If set to "Yes ", when the device contacts are full, the OLED on the front panel will not display prompt.
The default setting is "No".
VGA IN
•
Image Shift
After VGA input is plugged in and VGA input is displayed on the HDMI output device, if offset occurs,
you can adjust it manually by selecting Horizontal Offset or Vertical Offset.
•
VGA IN
Configure the offset location of VGA input. When set the image shift to "Horizontal Offset", configure
the horizontal offset of VGA input here; when set the image shift to "Vertical Offset", configure the
vertical offset of VGA input here. The parameter range is from -60 to 60. The default setting is 0.
•
Sampling Phase
After VGA input is plugged in and VGA input is displayed on the HDMI output device, if color distortion
occurs, you can manually adjust sampling phase from 0 to 32. Usually the same color presented on
VGA display device and HDMI display device has obvious difference. The default setting is 16.
Status
The Status page lists GVC3200/GVC3202's account status, peripheral status, network status, system info
status, remote control status.
Account
•
Account
Account name.
•
Number
SIP User ID for the account (if applicable).
•
Status
Display registration status for the SIP account. There are two statuses: Registered (in green),
Unregistered (in grey).
is "No".
setting
GVC3200/3202 Administration Guide
Version 1.0.3.64
P a g e
|
31
Need help?
Do you have a question about the GVC3200 and is the answer not in the manual?
Questions and answers