RESCUE MODE
When users power cycle the GVC3200/3202 device during upgrading process, the device can be recovered
by the "Rescue Mode".
a. The Rescue Mode will be triggered on next rebooting when users power cycle the GVC3200/3202
device during upgrading process as the figure shows below:
b. When the GVC320x device goes into the Rescue Mode, users should see the figure below. If the
network is connected, the device will continue to download and upgrade the firmware automatically.
c. If the network is not connected, users can use the mouse to select "SD Card" or "Manual" to recover
the device.
Figure 19: Rescue Mode
Figure 20: Rescue Mode - Network connected
GVC3200/3202 Administration Guide
Version 1.0.3.64
P a g e
|
90
Need help?
Do you have a question about the GVC3200 and is the answer not in the manual?
Questions and answers