Settings/Call Features - Grandstream Networks GVC3200 Administration Manual

Image offset
Image offset may occur in VGA input. Users can select horizontal offset to adjust the
Image shift
image's horizontal position or select vertical to adjust the image's vertical position.
This option is used to adjust the parameters of horizontal or vertical offset in the image
VGA in
shift of VGA input.
Sampling phase
A blurring or slight jitter issue may occur in VGA input. Users can set the sampling
VGA in
phase to adjust the color.
OLED indicator
Disable missed
If set to "Yes", the OLED will not indicate when there is missed call on the device. The
call OLED
default setting is "No".
indicator
Disable MWI If set to "Yes", the OLED will not indicate when there is an unread voice email. The
OLED indicator default setting is "No".
Disable new
If set to "Yes", the OLED will not indicate when there is new message on the device.
message OLED
The default setting is "No".
indicator
Disable contacts
If set to "Yes", the OLED will not indicate when the contact storage or message storage
full OLED
is full. The default setting is "No".
indicator

Settings/Call Features

Parameters Descriptions
It is used to set if the device will enable the video feature automatically when it makes
Start Video an outbound call. If set to "Yes", the video codec attributes will be included in the SIP
Automatically INVITE message. Or the attributes will not be included.
The default setting is "Yes".
Always Ring If set to "Yes", the device will always ring internal speaker.
Internal Ringer The default setting is "No".
Defines whether to disable dial plan in dial screen, contacts, incoming call and
Disable DialPlan
outgoing calls and MPK. The default setting is "No".
Configures the characters for filter when dialing out numbers. Multiple characters are
allowed. For example, if set to [()-], when dialing (0571)-8800-8888, the characters ()-
Filter Characters
will be automatically filters and number 057188008888 will be dialed directly. The
default setting is [()-].
It is used disable call waiting feature. If it is checked, the device will reject the second
Disable Call-
incoming call during an active session without user's knowledge. But this missed call
Waiting
record will be saved to remind users. The default setting is "No".
GVC3200/3202 Administration Guide
Version 1.0.3.64
P a g e | 58