FULTON Endura EDR Installation, Operation And Maintenance Manual page 56

OPERATION
!
WARNING
Non-Fulton product information is for
reference purposes only. No Fulton
document should substitute for full
review of documentation available
from the component manufacturer.
4
CAUTION
Commissioning/Start up by a non-
Fulton authorized person will void the
product warranty.
Please read these instructions and
post in an appropriate place near the
equipment. Maintain in good legible
condition.
When commissioning is complete, the
control must be placed into automatic
mode.
3-4
Siemens LMV3 Control
The Siemens LMV3 system is a fully packaged burner management system,
linkageless control and rst out annunciator.
A Siemens AZL display or ACS410 software will be required (not provided) for the
authorized service technician to perform con guration of the LMV3.
The left and right arrow keys are used for scrolling through the menu and
changing controller parameters. Pressing the Enter button accepts the menu
and parameter changes. It is possible to return to the main menu at any time by
repeatedly pressing ESC (Escape). See Figure 27.
FIGURE 27 SIEMENS AZL DISPLAY
SECTION 3
EDR-PURE-IOM-230608
© Fulton Group N.A., Inc. 2023