Remove The Raid Flash Power Module On The System Board Tray - Lenovo ThinkSystem SR635 V3 User Manual

Remove the RAID flash power module on the system board tray

Use this information to remove the RAID flash power module on the system board tray.
About this task
Attention:
• Read "Installation Guidelines" on page 45
work safely.
• Power off the server and disconnect all power cords for this task.
• Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-
sensitive components in their static-protective packages until installation, and handling these devices with
an electrostatic-discharge wrist strap or other grounding system.
Watch the procedure
A video of this procedure is available at YouTube:
DrpxDWLMfgtXO4O6BVYTim
Procedure
Step 1. Remove the top cover. See
Step 2. Disconnect the cable of the RAID flash power module.
Step 3. Remove the RAID flash power module on the system board tray.
Figure 110. Removal of the RAID flash power module on the system board tray
a. Open the retention clip on the holder of the RAID flash power module.
b. Take the RAID flash power module out of the holder.
ThinkSystem SR635 V3 User Guide
164
and "Safety inspection checklist" on page 46
https://www.youtube.com/playlist?list=PLYV5R7hVcs-
.
"Remove the top cover" on page
to ensure that you
212.