Remove A Processor - Lenovo ThinkSystem SR635 V3 User Manual

Figure 93. Removing a performance heat sink
a. Fully loosen all the screws on the heat sink in the removal sequence shown on the heat-
sink label.
b. Carefully lift the heat sink from the processor socket.
After you finish
• If you are replacing a heat sink, install a new heat sink. See
• If you are replacing a processor, remove the processor. See
• If you are instructed to return the component or optional device, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.

Remove a processor

Use this information to remove a processor.
About this task
Attention:
• Read "Installation Guidelines" on page 45
work safely.
• Power off the server and disconnect all power cords for this task.
• Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-
sensitive components in their static-protective packages until installation, and handling these devices with
an electrostatic-discharge wrist strap or other grounding system.
Watch the procedure
A video of this procedure is available at YouTube:
DrpxDWLMfgtXO4O6BVYTim
Procedure
ThinkSystem SR635 V3 User Guide
150
and "Safety inspection checklist" on page 46
https://www.youtube.com/playlist?list=PLYV5R7hVcs-
.
"Install a heat sink" on page
"Remove a processor" on page
151.
150.
to ensure that you