Install An Intrusion Switch - Lenovo ThinkSystem SR635 V3 User Manual

Install an intrusion switch

Use this information to install an intrusion switch.
About this task
Attention:
• Read "Installation Guidelines" on page 45
work safely.
• Power off the server and disconnect all power cords for this task.
• Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-
sensitive components in their static-protective packages until installation, and handling these devices with
an electrostatic-discharge wrist strap or other grounding system.
Watch the procedure
A video of this procedure is available at YouTube:
DrpxDWLMfgtXO4O6BVYTim
Procedure
Step 1. Touch the static-protective package that contains the intrusion switch to any unpainted surface on
the outside of the server. Then, take the intrusion switch out of the package and place them on a
static-protective surface.
Step 2. Remove the number 4 fan.
Step 3. Install the intrusion switch.
and "Safety inspection checklist" on page 46
https://www.youtube.com/playlist?list=PLYV5R7hVcs-
.
.
Chapter 5 Hardware replacement procedures
to ensure that you
115