Step 3.
Remove the memory module from the slot.
Figure 73. Memory module removal
a.
Open the retaining clip on each end of the memory module slot.
Attention: To avoid breaking the retaining clips or damaging memory module slots, handle the
clips gently.
b.
Grasp the memory module at both ends and carefully lift it out of the slot.
After you finish
1. A memory module slot must be installed with a memory module or a memory module filler. See
memory module" on page
2. If you are instructed to return the component or optional device, follow all packaging instructions, and
use any packaging materials for shipping that are supplied to you.
Install a memory module
Follow instructions in this section to install a memory module.
About this task
Attention:
ThinkSystem SR635 V3 User Guide
126
126.
"Install a