Front I/O module cable routing
Use the section to understand the cable routing for front I/O module.
Note: The illustration shows the cabling scenario for server models with 2.5-inch front drive bays. Location
of each connector on the front of the server varies by models. For detailed location of front I/O components
for different models, see "Front view" in User Guide.
Figure 167. Cable routing for a front I/O module on 2.5-inch chassis
From
VGA cable
1
USB cable
2
ThinkSystem SR635 V3 User Guide
224
To
VGA connector on the system board assembly
1
Front USB connector on the system board assembly
2