Install The Internal Cff Hba/Raid Adapter - Lenovo ThinkSystem SR635 V3 User Manual

• Power off the server and disconnect all power cords for this task.
• Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-
sensitive components in their static-protective packages until installation, and handling these devices with
an electrostatic-discharge wrist strap or other grounding system.
Watch the procedure
A video of this procedure is available at YouTube:
DrpxDWLMfgtXO4O6BVYTim
Procedure
Step 1. Remove the top cover. See
Step 2. Remove any components that may impede access to the internal CFF HBA/RAID adapter.
Step 3. Disconnect all cables from the internal CFF HBA/RAID adapter. See
page 222 and
Step 4. Lift the release pin, slightly slide the internal CFF HBA/RAID adapter as shown, and carefully lift it
out of the chassis.
Figure 70. Internal CFF HBA/RAID adapter removal
After you finish
If you are instructed to return the old internal CFF HBA/RAID adapter, follow all packaging instructions and
use any packaging materials that are provided.

Install the internal CFF HBA/RAID adapter

Use this information to install the internal CFF HBA/RAID adapter.
About this task
Attention:
• Read "Installation Guidelines" on page 45
work safely.
.
"Remove the top cover" on page
Chapter 6 "Internal cable routing" on page
and
https://www.youtube.com/playlist?list=PLYV5R7hVcs-
212.
217.
"Safety inspection checklist" on page 46
Chapter 5
"CFF RAID/HBA adapter" on
to ensure that you
.
Hardware replacement procedures
111